Epson T-B Series

T3-B T6-B Maintenance 8. Cable
54 T-B series Maintenance Manual Rev.1
8.2 Insert or Pull out of Power Cable
Name
Quantity
NOTE
Tools
Cross-point screwdriver
(No. 2)
1
For cross-recessed
screw
Power Cable
Power Cable
Removal
(1)
Turn OFF the
Manipulator.
(2)
Remove the
power cable cover.
Reference: 7.3 Power Cable Cover
(3)
Remove power cable clamp.
Remove power cable connector.
When removing the power cable connector, pull it out with pushing clips on both side
of the connector.
Power Cable
Installation
(1)
Connect power cable connector and install power cable clamp.
(2)
Mount the power cable cover.
Reference: 7.3 Power Cable Cover

NOTE