Chapter 1 Product Overview
11
1
Product Overview
This chapter describes features and specifications of the product.
Features
The TM-H6000IV is a high-end POS printer that can print on both slip paper (checks) and roll
paper (receipts).
The features are as follows:
Slip printing
•An optional Magnetic Ink Character Recognition (MICR) reader and an optional endorsement
printer (E/P) enable the printer to perform consecutive reading of MICR characters,
endorsement printing, and front printing, in a single pass of a check.
•High throughput using bidirectional minimum distance printing.
•A mecha
nical form stopper gives stability to slip paper.
•Opening the front carriage unit makes removing jammed paper easy.
•The validation model printer can print an 8-line validation.
Receipt printing
•High-speed printing enables issuing of batch receipts.
•Graphics are also printed with high-speed printing.
•Multi-tone graphics printing is possible.
•Bar code and two-dimensional symbol printing is possible.
•Easy drop-in paper loading.
•An autocutter is standard equipment.
• Paper-saving function is suppor
ted.
Software
•Command protocol is based on the ESC/POS Proprietary Command System.
• OPOS ADK, JavaPOS ADK, and Windows printer drivers are available.
•Automatic Status Back (ASB) function that automatically transmits changes in the printer
status is supported.
•A maintenance counter function is supported.
To Next Page
Loading...
