Epson TM-H6000IV

Chapter 2 Setup
65
2
Setting the Memory Switches/Receipt Enhancement
With the memory switch and R/E (receipt enhancement) function, which are software settings
for this printer, you can set the various functions.
For an outline of the functions, see the following section. Use the methods shown in the table
below; TM-H6000IV Utility, Me mo ry S witch Setting Mode, or ESC/POS comman
ds, to set the
memory switches and R/E functions.
Settings\Setting Methods
TM-H6000IV
Utility
Memory
Switch
Setting Mode
ESC/POS
Commands
Memory Switches
Power on notice ✔✔
Error signal output ✔✔
Slip paper jam detection ✔✔
Receipt unit open during printing ✔✔
Customized Values
User NV memory capacity ✔✔
NV graphics memory capacity ✔✔
Interface selection ✔✔
Number of head energizing parts ✔
Roll paper width ✔✔✔
Receipt print density ✔✔✔
Receipt print speed ✔✔✔
Command execution during offline ✔✔✔
Power supply unit capacity ✔✔✔
Autocutting at roll paper cover close ✔✔✔
Automatic paper reduction ✔✔✔
Print density in multi-tone printing ✔✔✔
Transmission speed for serial interface ✔✔✔
Receipt
Enhancement
Automatic top logo printing ✔✔
Automatic bottom logo printing ✔✔
Top logo printing at cover close ✔✔
Top logo printing at power on ✔✔
• For detailed information about the TM-H6000IV Utility, see the TM-H6000IV Utility User’s
Manual.
• For information about how to use the memory switch setting mode, see "Memory Switch
Setting Mode" on page 93.
• For detailed information about ESC/POS commands, see the ESC/POS Application
Programming Guide.