Chapter 1 Product Overview
15
1
Part Names and Functions
Power Switch
Turns the printer on or off. The marks on the switch: ( : OFF/ : ON)
Power Switch Cover
Install the power switch cover included with the printer to prevent
inadvertent changing of the power switch, to prevent tampering,
and to improve the appearance of the printer.
To reset the printer when the power switch cover is installed,
insert a long, thin object (such as the end of a paper clip) into the
hole in the power switch cover and press the power switch.
Before turning the printer off, it is recommended that you send a power-off command to the
printer. If you use the power-off sequence, the latest maintenance counter values are
saved. (Maintenance counter values are usually saved every two minutes.)
For detailed information about ESC/POS commands, see the ESC/POS Application
Programming Guide.
WARNING
If an accident occurs with the power switch cover attached, unplug the power cord
immediately.
Continued use of the printer may cause fire or shock.
Control panel
Power switch
Roll paper cover
Receipt unit
Manual cutter
Front cover
To Next Page
Loading...
