Epson TM-H6000IV - Driver Compatibility; Two-Color Printing; Ink Ribbon Cartridge

Chapter 5 Replacement of the TM-H6000III
111
5
Driver Compatibility
You can operate the TM-H6000IV with a driver for the TM-H6000III.
Advanced Printer Driver
If the TM-H6000III was controlled by APD Ver. 4.00 ~ 4.04, you need to change the TM-H6000IV
printer model name to “TM-H6000III” using the TM-H6000IV Printer Model Setting Utility.
If the TM-H6000III was controlled by an APD other than Ver. 4.00 ~ 4.04, you can replace it with
the TM-H6000IV without modifying the APD.
OPOS ADK
If the TM-H6000III was controlled by an OPOS ADK, you can replace it with the TM-H6000IV
without modifying the OPOS ADK.
Two-Color Printing
You cannot perform two-color receipt printing with the TM-H6000IV, unlike the TM-H6000III.
Ink Ribbon Cartridge
For slip printing, the ink ribbon cartridge ERC-43 is used with the TM-H6000IV while ERC-41
was used with the TM-H6000III. For endorsement printing, you can use the same ink ribbon
cartridge, ERC-32, as the TM-H6000III.
You cannot operate the TM-H6000III with a driver for the TM-H6000IV.