Chapter 1 Product Overview
35
1
MICR Reader (Factory-Installed Option)
*: When using ANSI/ISO specified paper at 25°C {77°F}
Recognition rate (%)=
{Total number of checks-(number of checks misread or not recognized)}/Total number of checks × 100
Reading method Magnetic bias
Supported fonts E13B, CMC7 (Alphabets are not supported.)
Recognition rate* Recognition rate: 99% or more
Recognition error rate: 0.1% or less
For reading MICR characters, paper length must be 120 mm {4.72"} or more.
To Next Page
Loading...
