Epson TM-H6000IV

Chapter 2 Setup
63
2
3
Connect the plug of the AC cable to the wall socket.
WARNING
• Be sure to unplug the AC cable from the wall socket whenever connecting or
disconnecting the power supply unit to the printer.
Failure to do so may result in damage to the power supply unit or the printer.
• Make sure the wall socket power supply satisfies the rated voltage requirements
of the power supply unit. Never insert the power supply cable plug into a socket
that does not meet the rated voltage requirements of the power supply unit.
Doing so may result in damage to both the power supply and the printer.
Do not turn on the printer before installing the printer driver.