50
Automatic power off time
Selectable from 0, 1 to 60 minutes. (initial setting: disabled)
Battery charge mode
•Mode 1 (initial setting)
•Mode 2
Operation mode when battery is low
•Mode 1 (initial setting)
•Mode 2
Transmission of Status notice
•Transmits (initial setting)
•Does not transmit
Paper reduction is not performed for space dot lines of graphics printing data.
When reducing barcode height, be sure to check reading a barcode with your barcode
reader in advance.
When using the USB interface, the automatic power off function is disabled even if the time
is set.
Power off time becomes 0 minutes when it is set to Disable or 20 minutes when it is set
to Enable in Software Setting Mode.
For detailed information, see "Auto-Power Off" on page 20.
For detailed information about the battery charge mode, see "Battery Charge Modes" on
page 20.
For detailed information about the operation mode when battery is low, see "Operation
Mode When Battery is Low" on page 21.
To Next Page
Loading...
