Chapter 2 Setup
51
2
Buzzer settings
•Buzzer sounds for low battery warning
•Disabled
•Enabled (initial setting)
•Buzzer sounds for roll paper end warning
•Disabled
•Enabled (initial setting)
•Buzzer sounds for error occurren ce warnings
•Disabled
•Enabled (initial setting)
Error signal output
•Enabled (initial setting)
•Disabled
Paper position immediately after the specific state
Specific state: after the roll paper cover is closed, the printer is reset, or the power is turned on.
•Function Select
•Enabled
•Disabled (initial setting)
•Position Select
•Cut Position
•Top Position (initial setting)
USB class
•Printer Class
•Vendor Class (initial setting)
To Next Page
Loading...
