Epson TM-T20II-i Technical Reference Guide

102
Web Service Settings - Server Access - Status Notification
You can set Status Notification for the TM-T20II-i.
You can use with TM-i firmware Ver.4.3 or later for this product.
Item Description
Status Notification Sets whether to use the Status Notification function or not.
Select [Enable] or [Disable].
ID Set ID for the server-side program to identify TM-T20II-i when [Status
Notification] is set to [Enable]. This ID becomes the user ID used for
Digest access authentication. The set value will also be passed as an
ID parameter value for the form data posted to the server.
Password Set your password used for Digest access authentication when
[Status Notification] is set to [Enable].
URL Specify the Test_print.php address of the Web server when [Status
Notification] is set to [Enable].
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] button to check if the address is accessible.
Interval(s) Set the request interval when [Status Notification] is set to [Enable].
Authenticate Server Sets whether the server authentication is performed with the
registered certificate when accessed through https.
Apply Saves settings to TM-T20II-i.

Epson TM-T20II-i Specifications

General

Brand	Epson
Model	TM-T20II-i
Category	Printer
Language	English