34
Changing the Paper Width
You can change the paper width from 80 to 58 mm by installing the included 58-mm width paper
guide plate. Follow the steps below to change the paper width.
1
Open the roll paper cover.
2
Align 3 projections on the 58-mm width paper guide plate with the
rectangular holes in the product, and push it downwards.
3
Make the setting for the paper width with the memory switch.
For information about the memory switch, see "Setting the Memory Switches/Receipt
Enhancement" on page 47
.
Because some parts of the print head and the autocutter contact the platen and they may
become worn out, once you change the paper width from 80 to 58 mm and use the product, you
cannot change it back to 80 mm.
Rectangular holes
Roll paper guide
To Next Page
Loading...
Need help?
General
