48
dpi: dots per inch
*1: No settings are required.
*2: Do not change the settings.
*3: Excluding some function.
Functions
Receive buffer capacity
•4 KB (initial setting)
•45 bytes
Processing when data receive error
•Prints “?” (initial setting)
•Ignored
BUSY condition
•Receive buffer full/Offline
•Receive buffer full (initial setting)
Receipt Enhancement
Auto top logo
*3
✔ -
Auto bottom logo
✔ -
Auto top/bottom logo extended functions
*3
✔ -
For information about the TM-T20II Utility, see the TM-T20II Utility User’s Manual.
To directly configure the product in the software setting mode, see
"Software Setting Mode"
on page 120.
No settings are required.
Do not change the settings.
Function TM-T20II Utility
Software Setting
Mode
To Next Page
Loading...
