137
Appendix
Printing and Cutting Positions
Paper Specifications
The values above may vary slightly as a result of paper slack or variations in the paper.
Take this into account when setting the cutting position of the autocutter.
80 mm width paper printing 58 mm width paper printing
Paper types Specified thermal paper
Form Roll paper
Size Roll paper diameter 83 mm {3.27"} maximum
Roll paper core Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"}
Roll width when taken
up
80 + 0.5/-1.0 mm
{3.15 + 0.02/-0.04"}
58 + 0.5/-1.0 mm
{2.28 + 0.02/-0.04"}
Paper width 79.5 ± 0.5 mm {3.13 ± 0.02"} 57.5 ± 0.5 mm {2.26 ± 0.02"}
Specified roll paper type NTP080-80 NTP058-80
Specified original paper type P350 (Kanzaki Specialty Papers)
AF50KS-E (Jujo Thermal Oy)
F5041 (Mitsubishi HiTec Paper Flensburg GmbH)
KT55F20, KT48F20 (Koehler Paper Group)
Paper must not be pasted to the roll paper core.
Autocutter blade position
Approx. 27.1 mm
{1.07"}
Approx. 10.5 mm
{0.41"}
Manual-cutter position
Center of the print dotline
Paper feed direction
Printable area
To Next Page
Loading...
