Epson TM-T20II-i - System Settings - Security - SSL; System Settings - Proxy - Proxy

107
Chapter 3 Application Development Information
3
System Settings - Security - SSL
You can set the SSL communication settings.
System Settings - Proxy - Proxy
You can change the proxy settings and service settings using proxy.
Item Description
Disable Disables SSL authentication.
Remove the
certificate
Select this checkbox to delete the SSL certificate.
Enable Enables SSL authentication.
Update the
certificate
Renews certificates registered to this product.
Create the self
signed certificate
Registers the self-signed certificate to this product.
Private key file Selects private key files registered to this product.
Certificate file Selects server certificate files registered to this product.
Certificate chain
file
Selects certificate chain files registered to this product
Apply Saves settings to TM-T20II-i.
 This product only supports TLS. SSL3.0 is not supported.
 HTTP communication is not available when SSL is enabled.
 When SSL is enabled, it will take about 1 minute and 30 seconds after the printer is turned
on for printing to be possible.
Item Description
Proxy URL and Port Number Enter the proxy server URL and port number in the following:
"http://host name: port number".
Example: http://10.0.0.1:8008
ID Registers the authentication ID for using proxy authentication.
Password Registers the authentication password for using proxy
authentication.
Enable Proxy for
following services:
Automatic
Update
Sets whether the proxy is used for automatic update of Web
contents.
Direct Print Sets whether the proxy is used for Server Direct Print.
Status
Notification
Sets whether the proxy is used for Status Notification.
Device Data
Notification
Sets whether the proxy is used for Device Data Notification.
Apply Saves settings to TM-T20II-i.