134
Other Device
Printing Specifications
dpi: dots per inch
*: When printing with the default print density level at 24V and 25°C {77°F}.
Customer Display DM-D110
Key Input Device Barcode scanner, Keyboard
Serial Communication Device Device that has a serial interface, such as a scale, cash
recycler or CAT terminal.
ePOS-Device SDK provides only an API that sends/receives
commands. For control of a serial communication device,
you will have to use an application of your own.
Other Device Cash drawer
80 mm width paper printing 58 mm width paper printing
Printing method Thermal line printing
Dot density 203 × 203 dpi
Printing direction Unidirectional with friction feed (Reverse feed is not
supported.)
Printing width Standard mode
(initial setting)
72.0 mm {2.83"}, 576 dots 52.5 mm {2.07"}, 420 dots
42 column mode 68.3 mm {2.69"}, 546 dots 47.3 mm {1.86"}, 378 dots
Characters
per line
Standard mode 48 (Font A), 64 (Font B) 35 (Font A), 46 (Font B)
42 column mode 42 (Font A), 60 (Font B) 42 (Font A), 31 (Font B)
Maximum print speed * 200 mm/s {7.87"/s}
Line spacing 3.75 mm {1/5"} (initial setting, programmable by command)
To Next Page
Loading...
Need help?
General
