30
Installing the Product
You can install the product horizontally on a flat surface (with the paper exit on top) or vertically
(with the paper exit at the front). Also, you can hang it on a wall using the included accessories.
Take measures to prevent the product from moving by vibration during paper cutting and
when using a drawer. Affixing tape (Model: DF-10) is provided as an option.
Do not place the product in dusty locations.
Do not knock or strike the product. This may cause defective print.
Do not catch cables or foreign matter under the product.
Horizontal Installation Vertical Installation Hanging Installation
To Next Page
Loading...
Need help?
General
