Epson TM-T20II-i Technical Reference Guide

103
Chapter 3 Application Development Information
3
Web Service Settings - Server Access - Device Data Notification
You can set the device data notification for this product.
You can use with TM-i firmware Ver.4.3 or later for this product.
Item Description
Settings Device Data
Notification
Sets whether to use the Device Data Notification function or not.
Select [Enable] or [Disable].
Server
Access
ID Set ID for the server-side program to identify TM-T20II-i when
[Device Data Notification] is set to [Enable]. This ID becomes the
user ID used for Digest access authentication. The set value will
also be passed as an ID parameter value for the form data posted
to the server.
Password Set your password used for Digest access authentication when
[Device Data Notification] is set to [Enable].
URL Specify the Test_print.php address of the Web server when [Device
Data Notification] is set to [Enable].
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] button to check if the address is accessible.
Server
Authentica
tion
Sets whether the server authentication is performed with the
registered certificate when accessed through https.
Box ID Set the Box ID for the communication device, when [Device Data
Notification] is set to [Enable].
POST
Error
Print
Message
Set whether or not to print an error message, if POST fails.
Message
Text
Set the text for the error messages.
Text
Attributes
Set the text decorations for the error messages.
Cut Set whether or not to cut paper after printing an error message.
Capture
Devices
Devices Select the devices that use device data notification.
Apply Save settings to TM-T20II-i.

Epson TM-T20II-i Specifications

General

Brand	Epson
Model	TM-T20II-i
Category	Printer
Language	English