118
NV Graphics Print Mode
You can confirm the following information by running NV graphics print mode:
• Capacity of the NV graphics
•Used amount of the NV graphics
•Unused capacity of the NV graphics
•Number of NV graphics that are registered
•Key code, number of dots in X direction, number of dots in Y direction, number of colors to be
def
ined.
•NV g raphics data
Follow the steps below.
1
Close the roll paper cover.
2
While pressing the Feed button, turn on the printer. (Keep pressing the Feed
button until the printer starts printing.)
After the printer status is printed, the self-test printing continuance gui dance is printed and
Paper LED flashes.
3
Hold down the Feed button for 1 second or more to move to mode
selection.
The mode selection guidance is printed and Paper LED flashes.
4
Press the Feed button for less than 1 second and then hold down for more
than 1 second to print the NV graphics information.
After the information is printed, the mode selection guidance is printed again.
5
To exit, turn off the printer or select "Exit and Reboot Printer".
“Select Modes by pressing Feed Button.
Continue SELF-TEST : Less than 1 second
Mode Selection : 1 second or more”
To Next Page
Loading...
Need help?
General
