Epson TM-T20II-i Technical Reference Guide

135
Appendix
Character Specifications
*1: 13 × 24 font is a font with a 1-dot horizontal space added to Font A of the standard mode. Therefore, the character
size is the same as Font A of the standard mode and the space between characters increases by 1 dot. When
printing graphics characters, there is 1-dot space between characters.
*2: Space between characters is not included. Characters can
be scaled up to 64 times as large as the standard size.
80 mm width paper printing 58 mm width paper printing
Number of characters Alphanumeric characters: 95
Extended graphics: 128 × 43 pages
International characters: 18 sets
Character
structure
Standard
mode
(initial setting)
Font A (default): 12 × 24 (including 2-dot horizontal spacing)
Font B: 9 × 17 (including 2-dot horizontal spacing)
42 column
mode
Font A
*1
: 13 × 24 (including
3-dot horizontal
spacing)
Font B: 9 × 17 (including
2-dot horizontal
spacing)
Font A
*1
: 9 × 17 (including 2-
dot horizontal
spacing)
Font B: 12 × 24 (including 2-
dot horizontal
spacing)
Character size
*2
(Standard/
Double-height/
Double-width/
Double-width,
double-height)
Font A
(Standard
mode)
1.25 × 3.00 mm/1.25 × 6.00 mm/2.50 × 3.00 mm/2.50 × 6.00 mm
{0.05 × 0.12"/0.05 × 0.24"/0.10 × 0.12"/0.10 × 0.24"}
Font B
(Standard
mode)
0.88 × 2.13 mm/0.88 × 4.26 mm/1.76 × 2.13 mm/1.76 × 4.26 mm
{0.03 × 0.08"/0.03 × 0.17"/0.07 × 0.08"/0.07 × 0.17"}
Font A
(42 column
mode)
1.25 × 3.00 mm/1.25 × 6.00 mm/
2.50 × 3.00 mm/2.50 × 6.00 mm
{0.05 × 0.12"/0.05 × 0.24"/
0.10 × 0.12"/0.10 × 0.24"}
0.88 × 2.13 mm/0.88 × 4.26 mm/
1.76 × 2.13 mm/1.76 × 4.26 mm
{0.03 × 0.08"/0.03 × 0.17"/
0.07 × 0.08"/0.07 × 0.17"}
Font B
(42 column
mode)
0.88 × 2.13 mm/0.88 × 4.26 mm/
1.76 × 2.13 mm/1.76 × 4.26 mm
{0.03 × 0.08"/0.03 × 0.17"/
0.07 × 0.08"/0.07 × 0.17"}
1.25 × 3.00 mm/1.25 × 6.00 mm/
2.50 × 3.00 mm/2.50 × 6.00 mm
{0.05 × 0.12"/0.05 × 0.24"/
0.10 × 0.12"/0.10 × 0.24"}

Epson TM-T20II-i Specifications

General

Brand	Epson
Model	TM-T20II-i
Category	Printer
Language	English