15
Chapter 1 Product Overview
1
Part Names and Functions
Power Switch
Turns the printer on or off. The marks on the switch: ( : OFF/ : ON)
A waterproof cover for the power switch is also included.
Power Switch Cover
Install the power switch cover that comes with the TM-T20II-i onto the printer to prevent
inadvertent changing of the power switch, to prevent tampering, and to improve the appearance of
the printer.
To operate the power switch, insert an object with a pointed tip such as a ballpoint pen into the hole
on the power switch cover.
CAUTION
Before turning on the product, be sure to check that the AC adapter is connected to the
power supply.
After the product is turned on, it requires about 30 seconds until it is ready to print.
WARNING
If an accident occurs with the power switch cover attached, unplug the power cord
immediately.
Continued use of the printer may cause fire or electric shock.
Use the waterproof power switch cover if the printer is installed in a humid location or exposed
to water. If current leakage occurs, it could result in electric shock.
Roll paper cover
Control panel
Cover open lever
Power switch
Cutter cover
Power switch cover
Manual cutter
To Next Page
Loading...
Need help?
General
