Epson TM-T20II-i - System Settings - Time - Time; Admin Settings - Maintenance - Reset

108
System Settings - Time - Time
You can set the time for the TM-T20II-i.
Admin Settings - Maintenance - Reset
You can reset the network functions and restore the settings for EPSON TMNet WebConfig to the
factory default settings.
Item Description
Time Sets the time.
Clicking [Get Time] shows the present time.
Time Zone (Hour) Sets the time zone.
Time Server
Setting
Use Time Server Sets whether to use the time server or not for time
setting.
Get Time Server Sets the method of getting the IP address/host name
for the time server.
Time Server Sets the IP address/host name for the time server when
[Get Time Server] is set to [Manual].
Time Server Status Shows the result of last getting time from the time server.
Apply Saves settings to TM-T20II-i.
Item Description
Reset Restarts the network functions while retaining the network setting values such as IP
address. The settings for EPSON TMNet WebConfig other than the network settings
are retained.
Factory Default Restores the settings for EPSON TMNet WebConfig to the factory default settings.
All the settings except for the internal time are initialized.
Self-signed certificates, Web contents, and PHP contents registered to this product
are also deleted. If a microSD card is inserted in this product, only the files in the
webapp folder are deleted. Other folders and files are not deleted.