116
*1: Printed only when the customer display is registered to ePOS-Device (see page 97).
*2: Printed only when the key input devices are registered to ePOS-Device (see
page 97).
*3: Printed only when the serial communication device is registered to ePOS-Device (see
page 98).
*4: Printed only when the automatic update setting for web contents is enabled (see
page 100).
*5: Printed only when the server direct print is enabled (see
page 101).
*6: Printed only when the status notification is enabled (see
page 102).
*7: Printed only when device data notification is enabled (see
page 103).
*8: Printed only when spooler settings are enabled (see
page 99).
*9: TM-i firmware Ver. 4.3 or later.
Spooler
*9
Shows spooler settings.
Use
Shows enable/disable for the spooler.
Count
*8
Shows the number of retry times when printing from
the spooler.
Interval(s)
*8
Shows the retry interval when printing from the
spooler.
Print forwarding
*9
Shows the printer forwarding route settings for the
spooler.
Print forwarding routes
Shows the route for print forwarding.
Syslog Storage Reserved for system.
Use microSD Reserved for system.
SSL
*9
Shows the SSL settings.
Use
Shows enable/disable for the SSL.
Item Description
To Next Page
Loading...
