Epson TM-T20II-i Technical Reference Guide

121
Chapter 3 Application Development Information
3
3
Hold down the Feed button for 1 second or more to move to mode
selection.
The mode selection guidance is printed and Paper LED flashes.
4
Press the Feed button for less than 1 second three times and then hold
down for more than 1 second to print the Receipt Enhancement
Information.
After the information is printed, the mode selection guidance is printed again.
Mode Selection
Modes
0: Exit and Reboot Printer
1: NV Graphics Information
2: Receipt Enhancement Information
3: Customize Value Settings
4: or more: None
Select Modes by executing following
procedure.
step 1. Press the Feed button less
than 1 second as many times
as the selected mode number.
step 2. Press Feed button for 1
second or more.
Modes
0: Exit
1: Print Current Settings
2: Print Density
3: Printing Speed
4: Serial Interface Settings
5: Auto Paper Feed&Cut at cover close
6: Paper Width
8: Default Character
9: Embedded Font Replacement
10: USB Interface Settings
11: Buzzer Control
12: Column Emulation
13: Interface Settings
15: Logo Emulation
16: Automatic Paper Reduction
17: Interface Selection
18: Power Supply Unit Capacity
Select Modes by executing following
procedure.
step 1. Press the Feed button less
than 1second as many times
as the selected mode number.
step 2. Press Feed button for 1
second or more.
Customize Value Settings

Epson TM-T20II-i Specifications

General

Brand	Epson
Model	TM-T20II-i
Category	Printer
Language	English