149
Chapter 4 ePOS-Print API
4
ď‚· Value of status
Constant (status) Description
ASB_NO_RESPONSE
No response from the TM printer
ASB_PRINT_SUCCESS
Printing is successfully completed
ASB_DRAWER_KICK
Status of the 3rd pin of the drawer kick-out connector = "H"
ASB_BATTERY_OFFLINE
Battery offline statusď€
(only for applicable devices) (in firmware Ver.2.2 and later)
ASB_OFF_LINE
Offline
ASB_COVER_OPEN
The cover is open
ASB_PAPER_FEED
Paper is being fed by a paper feed switch operation
ASB_WAIT_ON_LINE
Waiting to be brought back online
ASB_PANEL_SWITCH
The paper feed switch is being pressed (ON)
ASB_MECHANICAL_ERR
A mechanical error occurred
ASB_AUTOCUTTER_ERR
An autocutter error occurred
ASB_UNRECOVER_ERR
An unrecoverable error occurred
ASB_AUTORECOVER_ERR
An automatically recoverable error occurred
ASB_RECEIPT_NEAR_END
No paper in roll paper near end sensor
ASB_RECEIPT_END
No paper in roll paper end sensor
ASB_BUZZER
A buzzer is on (only for applicable devices)
ASB_WAIT_REMOVE_LABEL
Waiting for label to be removed (only for applicable devices)
ASB_NO_LABEL No paper in label peeling sensor (only for applicable devices)
ASB_SPOOLER_IS_STOPPED The spooler has stopped (Not used)
To Next Page
Loading...
Need help?
General