ESC K n
[Name] Print and reverse feed
[Format] ASCII ESC K n
Hex 1B 4B n
Decimal 27 75 n
[Range] 0 ≤ n ≤ 48
[Description] • Prints the data in the print buffer and feeds the paper [n × (vertical motion unit)]
backward.
• If n is out of the specified range, prints the data and does not feed the paper.
[Notes] • This command must not be issued continuously twice or more.
• The user must note that backward paper feeding causes the following problems:
• Paper feed pitch is incorrect.
• Printer noise is louder than normal.
• The paper may rub against the ribbon and become dirty.
ESC M n
[Name] Select character font
[Format] ASCII ESC M n
Hex 1B 4D n
Decimal 27 77 n
[Range] n = 0, 1, 48, 49
[Default] n = 1
[Description] • Selects character font.
n Character font
0, 48
Character font A (9 × 9).
1, 49
Character font B (7 × 9).
To Next Page
Loading...
