<A> GS V m
<B> GS V m n
[Name] Select cut mode and cut paper
[Format] <A> ASCII GS V m
Hex 1D 56 m
Decimal 29 86 m
<B> ASCII GS V m n
Hex 1D 56 m n
Decimal 29 86 m n
[Range] <A> m = 0, 1, 48, 49
<B> m = 65, 66, 0 ≤ n ≤ 255
[Description] • Cuts paper in the mode specified by m.
m Function
<A> 0, 48
1, 49
Cuts paper
<B> 65, 66
Feeds paper to (cut position + [n × (vertical motion unit)]) and
cuts the paper.
[Notes] • Type of cutting is set according to the installation position of the autocutter.
• Partial cut (one point left uncut)
• Full cut
To Next Page
Loading...
