• Second byte (printer information)
Bit Off/On Hex Decimal Status
0, 1 -- -- -- Reserved.
2 Off 00 0 No mechanical error.
On 04 4 Mechanical error occurred.
3 Off 00 0 No autocutter error.
On 08 8 Autocutter error occurred.
4 Off 00 0 Fixed.
5 Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurred.
6 Off 00 0 No automatically recoverable error.
On 40 64 Automatically recoverable error occurred.
7 Off 00 0 Fixed.
• Third byte (paper sensor information)
Bit Off/On Hex Decimal Status
0, 1 Off 00 0 Roll paper near-end sensor: paper adequate.
On 03 3 Roll paper near-end sensor: paper near end.
2, 3 Off 00 0 Roll paper end sensor (Paper sensor): paper
present.
On 0C 12 Roll paper end sensor (Paper sensor): paper not
present.
4 Off 00 0 Fixed.
5, 6 -- -- -- Reserved.
7 Off 00 0 Fixed.
Bits 0 and 1: If the printer is not equipped with the optional roll paper near-end sensor,
bits 0 and 1 are always “0” (paper adequate).
• Fourth byte (paper sensor information)
Bit Off/On Hex Decimal Status
0 ~ 3 -- -- -- Reserved.
4 Off 00 0 Fixed.
5, 6 -- -- -- Reserved.
7 Off 00 0 Fixed.