Epson TP1 - Restore Projects

Operation 3. AUTO Mode
TP1 Rev.5 83
3.6.4 Restore Projects
Restores projects backed up in USB memory to the Controller.
(1) Insert the USB memory into the Controller.
(2) In the [Program Mode] screen, move the cursor to [3 Restore Project...], and press
the <OK> key.
(3) The following screen appears. Press the <OK> key.
(4) The following screen appears.
Displays the project list in the folder “\EpsonRC50\Projects” in the USB memory.
Move the cursor to the desired project, and press the <OK> key.
(5) The following screen appears. Press the <F1> key.
(6) Executes the project restore.