Epson WF-3820 Series User Manual

Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
❏
e
printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1.
Turn the printer on.
2.
Click start, and then click Network on the computer.
3.
Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
Click Uninstall and start again if the Uninstall screen is displayed.
Note:
e printer name you set on the network and model name (EPSON XXXXXX (XX-XXXX)) are displayed on the
network screen. You can check the printer's name set on the network from the printer's control panel or by printing a
network status sheet.
Scanning > Scanning Using WSD > Setting Up a WSD Port
101

Epson WF-3820 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 2400 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	250 sheets
Duplex Printing	Yes
Scanner Type	Flatbed color image scanner
Display	2.7" color touchscreen
Functions	Print, Copy, Scan, Fax
ADF Capacity	35 sheets
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Paper Sizes Supported	A4, A6
Mobile Printing	Epson Connect, Apple AirPrint, Mopria
Dimensions (W x D x H)	16.7" x 19.8" x 10.8"