Epson WF-3820 Series - Basic Menu Options for Copying

Copying ID card
Scans both sides of an ID card and copies onto one side of a paper.
1.
Place the original on the scanner glass.
“Placing Originals” on page 33
2.
Select Copy on the home screen.
3.
Select the Advanced Settings tab, and then enable ID Card Copy.
4.
Specify the Orientation (Original), and then select OK.
5.
Tap
x on the Copy tab.
Basic Menu Options for Copying
Note:
e items may not be available depending on other settings you made.
Color Mode:
Select whether to copy in color or in monochrome.
❏ B&W
Copies the original in black and white (monochrome).
❏ Color
Copies the original in color.
(2-Sided):
Select 2-sided layout.
❏ 1→1-Sided
Copies one side of an original onto a single side of paper.
❏ 1→2-Sided
Copies two single-sided originals onto both sides of a single sheet of paper. Select the orientation
of your original and the binding position of the paper.
Density:
Increase the level of density when the copying results are faint. Decrease the level of density when ink
smears.
Copying > Basic Menu Options for Copying
85