Related Information
& “Controlling Using Protocols” on page 360
& “SSL/TLS Communication with the Printer” on page 369
Controlling Using Protocols
You can print using a variety of pathways and protocols.
If you are using a multi-function printer, you can use network scanning and PC-FAX from an unspecied number
of network computers.
You can lower unintended security risks by restricting printing from specic pathways or by controlling the
available functions.
Controlling protocols
Congure the protocol settings.
1.
Access Web Cong and then select the Network Security tab > Protocol.
2.
Congure each item.
3.
Click Next.
4.
Click OK.
e
settings are applied to the printer.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 269
& “Protocols you can Enable or Disable” on page 360
& “Protocol Setting Items” on page 361
Protocols you can Enable or Disable
Protocol Description
Bonjour Settings You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so
on.
SLP Settings You can enable or disable the SLP function. SLP is used for push scanning and network
searching in EpsonNet
Cong
.
WSD Settings You can enable or disable the WSD function. When this is enabled, you can add WSD devices,
and print from the WSD port.
LLTD Settings You can enable or disable the LLTD function. When this is enabled, it is displayed on the
Windows network map.
LLMNR Settings You can enable or disable the LLMNR function. When this is enabled, you can use name
resolution without NetBIOS even if you cannot use DNS.
Administrator Information
>
Advanced Security Settings
>
Controlling Using Protocols
360
To Next Page
Loading...
Need help?
General
