JPEG Settings
(Select Photo Menu) :
Make settings for ordering, selecting, and deselecting image data.
Paper Setting:
Specify the paper source settings which you want to print on.
Color Mode:
Select a color setting whether you normally print in B&W or Color.
Layout:
Select how to layout the JPEG les. Borderless is for printing one le per sheet without margins around
the edges. e image is enlarged a little to remove borders from the edges of the paper. With Border is
for printing one le per sheet with margins around the edges. 20-up is for printing 20 les on one sheet.
Index is for making index printing with information.
Fit Frame:
Select On to crop the image to t into the selected print layout automatically. If the aspect ratio of the
image data and the paper size is dierent, the image is automatically enlarged or reduced so that the
short sides match the short sides of the paper. e long side of the image is cropped if it extends beyond
the long side of the paper. is feature may not work for panorama photos.
Quality:
Select High for higher quality printing, but the printing speed may be slower.
Date:
Select the format of the date the photo was taken or saved.
e
date is not printed for some layouts.
Enhance:
Select this mode to improve the brightness, contrast, and saturation of the photo automatically. To turn
o automatic improvement, select Enhance O.
Fix Red-Eye:
Select On to automatically x the red-eye eect in photos. Corrections are not applied to the original
le, only to the printouts. Depending on the type of photo, parts of the image other than the eyes may
be corrected.
Clear All Settings:
Resets all settings to their defaults.
Printing TIFF Files from a Memory Device
You can print TIFF les from a memory device connected to the printer.
1.
Connect the memory device to the printer's external interface USB port.
“Inserting and Removing an External USB Device” on page 36
Printing
>
Printing Photos
>
Printing TIFF Files from a Memory Device
75
To Next Page
Loading...
