Epson WF-3820 Series User Manual

An Image of the Reverse Side of the Original Appears in the Sent Fax
e following causes can be considered.
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals” on page 33
The density setting is high when sending faxes.
Solutions
Select Fax > Fax Settings > Scan Settings > Density, and then lower the setting.
Received Fax Quality is Poor
The Image Quality of Received Faxes is Poor
e following causes can be considered.
ECM setting is disabled.
Solutions
Select Settings > General Settings > Fax Settings > Basic Settings and enable the ECM setting on the
control panel.
is
may clear errors that occur due to connection problems. Note that the speed of
sending and receiving faxes may be slower than when ECM is disabled.
The image quality setting is low on the sender's fax machine.
Solutions
Ask the sender to send faxes at a higher quality.
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Received Fax Quality is Poor
227

Epson WF-3820 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 2400 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	250 sheets
Duplex Printing	Yes
Scanner Type	Flatbed color image scanner
Display	2.7" color touchscreen
Functions	Print, Copy, Scan, Fax
ADF Capacity	35 sheets
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Paper Sizes Supported	A4, A6
Mobile Printing	Epson Connect, Apple AirPrint, Mopria
Dimensions (W x D x H)	16.7" x 19.8" x 10.8"