Epson WF-3820 Series User Manual

4.
Select Push Button Setup (WPS).
5.
Hold down the [WPS] button on the wireless router until the security light ashes.
If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the
documentation provided with your wireless router for details.
6.
Tap Start Setup on the printer.
7.
Close the screen.
e
screen automatically closes
aer
a
specic
length of time.
Note:
If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.
8.
Close the Network Connection Settings screen.
Related Information
& “Checking the Network Connection Status” on page 248
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to a wireless router by using a PIN code. You can use this method to set up if a
wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless
router.
1.
Tap
on the home screen.
2.
Select Wi-Fi (Recommended).
If the printer has already been connected by Ethernet, select Router.
3.
Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change Settings to
change the settings.
Adding or Replacing the Computer or Devices > Re-setting the Network Connection > Making Wi- …
238

Epson WF-3820 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 2400 dpi
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Paper Capacity	250 sheets
Duplex Printing	Yes
Scanner Type	Flatbed color image scanner
Display	2.7" color touchscreen
Functions	Print, Copy, Scan, Fax
ADF Capacity	35 sheets
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Paper Sizes Supported	A4, A6
Mobile Printing	Epson Connect, Apple AirPrint, Mopria
Dimensions (W x D x H)	16.7" x 19.8" x 10.8"