185
6. Select Fax Send Settings.
7. Select Send Fax Later.
8. Select On.
9. Enter your desired time and press the OK button.
10. Press the back button twice to return to the main fax screen.
11. Press the start button to send the fax.
Note: To cancel faxing, press the cancel button.
After scanning your originals, your product dials the number and sends the fax at the specified time.
Note: You cannot send another fax until the fax has been sent at the specified time. If you want to send
a fax before then, cancel the scheduled fax by selecting Fax on the home screen and then deleting it. If
the product is turned off at the specified time, the fax is sent when it is powered on.
Parent topic: Sending Faxes from the Product Control Panel
Related tasks
Selecting the Date and Time
Related topics
Placing Originals on the Product
Setting Up Contacts and Contact Groups
Dialing Fax Numbers from a Connected Telephone
If you connected a telephone to the EXT port on your product, you can send a fax by dialing the fax
number from the connected telephone. If the recipient's phone number and fax number are the same,
you can speak to the recipient before sending the fax.
Note: When a number is dialed using the connected telephone, it takes longer to send a fax because the
printer performs scanning and sending simultaneously. While sending the fax, you cannot use the other
features.
1. Place your original on the product for faxing.
2. Press the home button, if necessary.
3. Dial the fax number from the connected telephone. Speak to the recipient if necessary.
To Next Page
Loading...
Need help?
General
