Epson Work Force WF-2930DWF User Manual

249
Related references
Where to Get Help
Paper Source Settings Options
Related tasks
Using AirPrint
Selecting the Line Type
Accessing the Web Config Utility
Checking for Software Updates
Related topics
Replacing Ink Cartridges and Maintenance Boxes
Wi-Fi Networking
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the home button, if necessary.
4. Select Maintenance > Nozzle Check.
5. Press the start button.
The nozzle pattern prints.
6. Do one of the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check the other solutions in this book or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean the print head.
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic: Solving Problems
Related concepts
Print Head Cleaning

Epson Work Force WF-2930DWF Specifications

General

Print Technology	Inkjet
Functions	Print, Scan, Copy, Fax
Automatic Document Feeder	Yes
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Fax Modem Speed	33.6 kbps
Connectivity	Wi-Fi, USB
Print Resolution	5760 x 1440 dpi
Duplex Printing	Yes
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Paper Capacity	100 sheets
Mobile Printing	Apple AirPrint
Display	2.4-inch color LCD