Epson Work Force WF-2930DWF User Manual

37
Selecting Wireless Network Settings from the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install
the necessary software by downloading it from the Epson website. The installer program guides you
through network setup.
Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the warranty period. We
recommend that you make your own backup or print out your fax and network data and settings.
1. Press the home button, if necessary.
2. Select Wi-Fi Setup.
You see a screen like this:
3. Select Wi-Fi (Recommended).
4. Press the OK button to proceed.
5. Select Wi-Fi Setup Wizard.
6. Select the name of your wireless network or select Other SSIDs to enter the name manually. Use
the displayed keypad to enter your network name.

Epson Work Force WF-2930DWF Specifications

General

Print Technology	Inkjet
Functions	Print, Scan, Copy, Fax
Automatic Document Feeder	Yes
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 2400 dpi
Fax Modem Speed	33.6 kbps
Connectivity	Wi-Fi, USB
Print Resolution	5760 x 1440 dpi
Duplex Printing	Yes
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Paper Capacity	100 sheets
Mobile Printing	Apple AirPrint
Display	2.4-inch color LCD