Epson Work Force WF-2930DWF - Wi-Fi Protected Setup (WPS); Using WPS to Connect to a Network

41
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the home button, if necessary.
2. Select Wi-Fi Setup.
You see a screen like this:
3. Select Wi-Fi (Recommended).
4. Press the OK button to proceed.
5. Select Push Button Setup (WPS).
6. Press the OK button to proceed.