234
5. Press the start button to start cleaning the paper guide.
6. Repeat these steps as necessary until the paper comes out clean.
7. If the paper is still smeared with ink, turn off the product and open the scanner unit.
Caution: Do not touch the flat white cable or translucent film inside the product. Be careful not to
trap your hand or fingers when opening or closing the scanner unit.
8. Using a cotton swab, wipe off any ink smears on the part shown in the illustration below.
Caution: Do not use tissue paper to clean the inside of the product as lint can clog the print head
nozzles.
To Next Page
Loading...
