Erbe ERBECRYO 2 - Status Messages, Error Messages; Error Messages on Blue Screen

59 / 80
8 • Status Messages, Error Messages
80113-401_V24023  2023-05
Chapter 8
Status Messages, Error Messages
Error messages on a blue screen
The errors are not described individually in the table below.
 Follow the instructions on the screen.
 Note the error code (e.g. K-45).
 Switch off the unit.
 Forward the error code to Technical Service.
Fig. 8-1
Status messages
Status messages are of an informative nature.
Fig. 8-2
Example of a status message in segment (3) of the display.
L1
L2
L3
R1
R2
R3
L1
L2
L3
R1
R2
R3
3
Status message Description
Footswitch is ready for operation. The footswitch has been detected.
Footswitch has been disconnected. The footswitch has been disconnected.
Unit has cooled down. The unit has cooled down following overheating.