Front Panel Control
Transport Stream ID <id> Selects the Transport Stream with ID <id> to modify its parameters.
Service List The list of services in the current Transport Stream.
Add Service Adds a new service to the current Transport Stream.
Service <name>
Selects the service with <name> already added to the current
Transport Stream.
Component List List of components in the current service.
y Add Component Adds a new component to the current service.
<Component name> on <pid>
Selects the component with <component nam
e> and <pid> already
added to the current service.
Elementary Stream
The elementary stream associated with the component produced by
one of the VCM modules in the unit.
PID
The Packet Identifier that identifies the TS packets carrying the
current component.
Bit Rate Weighting
Fixed, Minimum, 2-20. The weighting associated to the current
component. A component with Fixed weighting does not respond to
changes in the Transport Stream Bit Rate. If Minimum is set for a
component, it will always use the minimum Bit Rate defined for the
video profile it is encoded with. A value 2-20 determines how much
a component is changed when the Transport Stream Bit Rate is
changed relative to other components with Bit Rate weighting other
than Minimum.
Service Provider The name of the service provider as appears in the NIT.
Service Name The name of the service as appears in the NIT.
Service ID
The unique identifier of the current service within the current
Transport Stream.
Service Type Digital TV, Digital Radio, Teletext, Mosaic, Data Broadcast.
PMT Pid PID assigned to the PMT that describes the current service.
Logical Channel
Appears in the NIT and provides a default channel number label for
the current service.
PCR PID
The PID of the TS packets that carry the clock reference for the
current service. If the service has a component with the Embedded
PCR parameter set to On, this field contains the PID of that
particular video stream and it is read only.
Scrambling
Off, BISS-1, BISS-E. Disables or enables the scrambling of the
current service by the Basic Interoperable Scrambling System with
or without encrypted keys.
BISS SW
The 12 hexadecimal digit clear session word used for scrambling
the current service. Visible only if BISS-1 is selected for Scrambling.
BISS ESW
The 16 hexadecimal digit encrypted session word used for
scrambling the current service. Visible only if BISS-E is selected for
Scrambling. The key entered here is encrypted by the BISS Injected
ID found under Advanced/System/Base Unit.
Current State The Setmode state of the Transport Stream. Read only parameter.
Change State
Sets the Setmode state of the Transport Stream. The options
available depends on the value set for MGP Mode under
Advanced/System/MGP Support
To Next Page
Loading...