Ericsson AVP 1000 - CE-A, CE-X, CE-Xa Pre-Processor Advanced Menu

Front Panel Control
4-30
EN/LZT 790 0023/1 R16A
System Location The location where the current unit is installed.
Will This Unit Be SNMP Polled
True, False. Determines whether the unit is polled for SNMP
information or not.
Time Elapsed Before Control Assumed Lost
The amount of time between sysUpTime requests before the
connection with the control system is assumed to be down.
Currently in Contact with Control System Determines if a connection has been established with the trap server.
SNMP Trap Server Configures the Trap Server destinations.
Community The community name for all trap messages.
SNMP Version The version of SNMP used for the trap messages.
Trap Sequence Index The reference number of the last alarm trap sent.
Config Trap Wait
The minimum time in seconds between each configuration change
message sent.
Config Event Index The reference number of the last configuration change trap sent.
Trap Level
Start Msgs, warning-critical; Start Msgs, minor-critical; Start Msgs,
major-critical; Start Msgs, critical; Start Msgs only. Configures the
levels of the alarm and the start traps sent from the current unit.
Accept Configuration Accepts the changes in hardware configuration if there are any.
4.4.2.1 CE-a, CE-x, CE-xA Pre-Processor Advanced Menu
Note: The availability of some options depends upon the hardware fitted or
licenses available.
Table 4.13 CE-a, CE-x, CE-xA Pre-Processor Advanced Menu
Build
Card Id
Name
Software Version
Hardware Version
CPLD Version
Hardware S Number
S Number
Advanced
Chip Id
Requested Air Flow
PCR Interval
FrontEnd FPGA Temperature
Temperature