Ericsson AVP 1000 - BISS Encryption Per Component; CE-* VCM Identity Reporting; Chassis Variants; Voyager II

Differences For Contribution Encoder and Voyager II
D-4
EN/LZT 790 0023/1 R16A
D.2.4 BISS Encryption per Component
Although BISS encryption is supported, it is not possible to select individual
components to be scrambled.
It is not possible to reset the CE-x pair from the browser.
D.3 Voyager II
D.3.1 Chassis Variants
There is not an option for a Dual AC Flying Lead, 6-slot variant of Voyager II.
D.3.2 Features not Supported in Voyager II
IP Data Ports
IP input is not supported. All data ports are available for outputs.
D.3.3 BISS Encryption per Component
Although BISS encryption is supported, it is not possible to select individual
components to be scrambled.
It is not possible to reset the CE-x pair from the browser.
D.4 CE-* VCM Identity Reporting
To help maintain consistency across CE, Voyager II and AVP products, existing CE
and Voyager II units licensed using the previous scheme (e.g. CE-x/H42)
automatically have an internal license translation scheme applied when upgraded to
v9.x software, so will report and display the relevant new license.
Table D.1 details the automatic translation. All features should be maintained
through this translation.
Table D.1 CE-* Option Card Identity and License Translation
Legacy
Identity
Legacy
BoardID
v9.x
Identity
V9.x
BoardID
Automatically Enabled Licenses Features Enabled
CE-a/S20 1243 CE-a 1265
None
SD MPEG-2
[1]
CE-a/S40 1241
CE/SWO/CE-a/H264 SD MPEG-2
[1]
SD H.264
CE-a/H20 1242
CE/SWO/CE-a/HD SD MPEG-2
[1]
HD MPEG-2