Ericsson AVP 1000 - HD Video Formats

Technical Specification
EN/LZT 790 0023/1 R16A
B-11
Scene Cuts
Using the VCM Pre-Processor Metrics listed above, the pre-processor determines
scene cuts in the input video. This should cause the encoding engine to minimise
the effect of the scene change. This can shorten or lengthen the GOP. It is
configurable.
B.3.11.2 HD Video Formats
Active Video
The active video has either 1080 lines (interlaced) or 720 lines (progressive).
Video Resizing
The unit supports the input of video at 1920 x 1080i (25 Hz and 29.97 Hz) and 1280
x 720p (50 Hz and 59.94 Hz). The following sub-sampling of any input format is
supported.
Table B.15 Video Resizing (HD) Specification
25 Hz input format 29.97 Hz input format Process Comment
1080x1920@25 (Pass-
thru)
1080x1920@29.97 (Pass-
thru)
Scale 1/1
1080x1440@25 1080x1440@29.97
Not available for the CE-a J2K
option card
720x1920@50 (Pass-
thru)
720x1920@59.94 (Pass-
thru)
Scale 1/1
Not available for the CE-a J2K
option card
720x960@50 720x960@59.94
Not available for the CE-a J2K
option card
Video Profiles
Depending on the option module fitted, the following video profiles are supported.
Table B.16 Video Profiles (HD) Specification
Profile Available on Option Module License Required
H.264 CE/SWO/CE-x/H264 on a CE-x or
a CE-xA
CE/SWO/CE-a/H264 on a CE-a
HD Main Profile Level 4.0 4:2:0 8 bit CE-x, CE-xA, CE-a
CE/SWO/CE-x/HD on a CE-x or a
CE-xA
CE/SWO/CE-a/HD on a CE-a
HD High Profile Level 4.0 4:2:0 8-bit CE-x, CE-xA, CE-a
CE/SWO/CE-x/HD on a CE-x or a
CE-xA
CE/SWO/CE-a/HD on a CE-a
HD High Profile Level 4.1 4:2:0 8 bit CE-x, CE-xA, CE-a
CE/SWO/CE-x/HD on a CE-x or a
CE-xA
CE/SWO/CE-a/HD on a CE-a
HD Hi422 Profile Level 4.1 4:2:2
8 bit
CE-x, CE-xA
CE/SWO/CE-x/HD and
CE/SWO/CE-x/422