EasyManua.ls Logo

Ericsson AVP 1000 - CE-A J2 K VCM

Ericsson AVP 1000
508 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Options, Licensing and Upgrades
EN/LZT 790 0023/1 R16A
7-7
Wide Screen Signaling (WSS or WSS-AFD).
SMPTE 2016-3 AFD and Bar Data.
7.4.1.7 Audio Compression
Eight channels AES/EBU digital audio input either de-embedded from SD/HD-
SDI or via the Audio/Data input connector.
Supported audio coding modes:
- MPEG-1 Layer II (32 kbps to 384 kbps) (additional pairs available with
CE/SWO/M1L2 software option).
- MPEG-1 Layer II Phase Aligned Audio (384 kbps) (software option
CE/SWO/PAA).
- Dolby Digital (56 kbps to 640 kbps) (software option CE/SWO/DOLBY/AC3).
- AAC LC/HE-AAC (32 kbps to 192 kbps) (software option CE/SWO/AAC).
- Pass-thru of pre-encoded Dolby Digital (1 5.1 channel).
- Pass-thru of pre-encoded Dolby E.
- Pass-thru of uncompressed audio (Linear PCM SMPTE 302M).
7.4.1.8 Indications
An LED is provided to indicate Lock Status.
7.4.2 CE-a J2K VCM
7.4.2.1 Overview
The CE-a J2K Video Compression Module (VCM) is a single card that can encode a
single video input.
Figure 7.3 CE-a J2K VCM
Note: Up to 6 CE-a J2K modules can be fitted in the unit, but limitations due to
operational temperature may apply.
The CE-a J2K VCM cannot decode or encode audio input streams. However, it can
pass-through linear PCM or Dolby E encoded streams embedded in the SDI signal.
The VCM is also capable of processing Ancillary Data (ANC) but only in HD mode.

Table of Contents

Related product manuals