5.4.3 Using the Device Configuration Page
This section describes the tasks that can be completed on the Device Configuration
page.
5.4.3.1 Customizing the Quick Setup Menu
The Configuration Items widget displays the Quick Setup menu as a tree. The
tree contains the most commonly used parameters. These include default
parameters as well as the parameters added by the user. To add your own
parameters to the tree, do the following:
1. Open the Customize Items dialog by selecting Actions > Customize Items.
2. In the Configuration Items widget of the Customize Items dialog, select the
Quick Setup Items node, and select Actions > Add Folder.
3. Double click on the newly created node, and rename it to a more descriptive
name.
4. Scroll down to the item you want to add to your custom list in the Advanced
Video Processor Settings widget.
5. By holding down the left mouse button, drag the item over the new folder in the
Configuration Items widget.
6. Add the item to the new folder by releasing the mouse button. The item cannot
be added to the Quick Setup Items node. Any valid drop position is indicated
by the dragging rectangle changing into green.
7. Repeat the process for any additional items you want to add. You can create as
many folders as you wish or you can use any previously created one. The
created folders can be reordered by the drag and drop technique used for
adding the item. The added items can also be relocated through drag and drop.
To delete a folder or an item, select it then choose Action > Remove Item.
8. When ready, click Save to save the changes. The new items are added to the
Quick Setup menu.
Note: The list of added items can be exported by selecting Action > Export and
can be imported on another unit by Action > Import.
The Settings widget of the Customize Items dialog displays all the options
available to be set regardless of the visibility of the individual items.
(Normally, some items might be hidden depending on the settings selected
for other parameters.) When such an item is added to the Configuration
Items list and the list is saved, the item will only show up on the Quick
Setup list if the other parameters controlling its visibility are changed to the
correct value.
To Next Page
Loading...