Front Panel Control
4.3.1.1.5 Audio Input Monitor
On the Audio Input Monitor Screen, see Figure 4.4, all the encoded channels from
an option card can be displayed.
Figure 4.5 Audio Input Monitor Screen
The entire audio input range for an encoder card can be monitored by selecting the
AV Encoder/Audio Monitor menu. The rotary knob can be used to switch between
Channels 1-8 and Channels 9-16 on each card.
4.4 Front Panel Menus
4.4.1 Main Menu
Shortly after power-up the title bar of this screen displays the current location within
the menu tree and the recently loaded configuration. The main area of the screen
may also display either the current IP Address or Service Name, if one has been
set.
To Next Page
Loading...