Ericsson AVP 1000 - Page 124

Front Panel Control
4-8
EN/LZT 790 0023/1 R16A
4.3.1.1.1 Title Bar
Alternately displays the current location within the menu tree and the recently loaded
configuration. If the loaded configuration was changed in any way, the '(changed)'
string is appended to the name.
4.3.1.1.2 Icons
The icons allow the user to determine the current state of the AVP 3000 at a glance.
The icons available on the main screen are shown in Table 4.3.
Table 4.3 Main Screen Icons
Icon Description
Output Power Modulation State Output State
Irrelevant Irrelevant Off
Moderate Off On
High Off On
Moderate On On
High On On
Off Air
Either of Output State or Modulation State is Off or the Current State of the
satellite modulator Transport Stream is not Online.
On Air
Both Output State and Modulation State are On and the Current State of the
satellite modulator Transport Stream is Online.
CLEAR
No service in an enabled Modulator Transport Stream output is BISS or RAS
encrypted
SCRAMBLED
At least one service in an enabled Modulator Transport Stream output is BISS or
RAS encrypted
4.3.1.1.3 Active Area
The active area is used for:
• Displaying the IP address and status information about the active streams
• Displaying the Satellite Modulator parameters (AVP 3000 only)
• Displaying the menu system
• Displaying parameter setting
4.3.1.1.4 Audio Monitor
A selected audio input can be monitored. To select an audio input for constant
monitoring, navigate to Unit Config/Display Setup/Audio Monitor Input and set
the slot and channel parameters.