Ericsson AVP 1000 - IF Output; Satellite Modulator Option Card

Technical Specification
EN/LZT 790 0023/1 R16A
B-21
Function Available Coding Modes Weighting (points)
Phase Aligned MPEG-1 Layer II
audio encoding
8 Channel Aligned 40
Dolby Digital encoding Mono 1.0 (center, from left)
Mono 1.0 (center, from right)
Stereo (2.0)
30
Multi-Channel Stereo (3/2L) 50
AAC-LC, HE-AAC, HE-AACv2
encoding
Stereo (2.0) 15
Multi-Channel Stereo (3/2L) 40
Dolby Digital Pass-thru (Dolby
Digital AC-3)
All Dolby Digital coding modes up to 5.1 and up to
640 kbps supported for Pass-thru.
5
Dolby-E Pass-thru Dolby-E Pass-thru only 25
LPCM Pass-thru 2-channel Linear PCM Pass-thru only 25
B.3.13 Satellite Modulator Option Card
The Satellite Modulator Option Card is only available for the AVP 3000 Voyager.
B.3.13.1 IF Output
Table B.26 Satellite Modulator IF Output Specification
Item Specification
Safety status SELV
Connector designation IF OUT MAIN
Connector type BNC female 75 Ω
Output impedance 75 Ω
Return loss >20 dB, 50 -180 MHz
Output power –30 to +5 dBm in 0.1 dB steps
Output power ramp rate 16 dB/s over operational power level range
Power level stability ±0.5 dB
Modulation Standard DVB-S, DVB-DSNG, DVB-S2, DVB-S2X
Modulation
QPSK
1,2,3,4
, 8PSK
1,2,4
, 8PSK-L
4
,16QAM
2
, 16APSK
1,4
, 16APSK-L
4
,
32APSK
1,4,
,32APSK-L
4
, 64APSK
4
and 64APSK-L
4
FEC
1/4
1,4
, 1/3
1,4
, 2/5
1,4
, 1/2, 3/5
1,4
, 2/3, 3/4, 4/5
1,4
, 5/6, 7/8
2,3
, 8/9
1,4
, 9/10
1,4
,
13/45
,4
, 9/20
,4
, 8/15
,4
, 11/20
,4
, 5/9
,4
, 26/45
,4
, 28/45
,4
, 23/36
,4
, 25/36
,4
,
32/45
,4
, 13/18
,4
, 11/15
,4
, 7/9
,4
, 77/90
,4
Available options depend upon Modulation Standard and Modulation
Mode
Symbol Rate 1 to 45 Msymbol/s (Standard)
0.132 to 66 Msymbol/s (Extended symbol rate option)
Spectrum roll-off factor 5%, 10%, 15%, 20 %, 25%, 35 %