Ericsson AVP 1000 - ASI I;O Option Card Connectors

Installing the Equipment
2-14
EN/LZT 790 0023/1 R16A
Table 2.23 Satellite Modulator Option Card Connectors
Item Specification
Connector types 50 Ω female SMA L-Band (L-BAND IN and L-BAND OUT MAIN)
75 Ω female SMA L-Band F-type (L-BAND OUT MON)
75 Ω female BNC (IF OUT MAIN and IF OUT MONITOR)
Connector designation L-BAND IN
L-BAND OUT MAIN
L-BAND OUT MON
IF OUT MAIN
IF OUT MONITOR
Pin-outs Centre
Shield
Input/Output/Monitor
Ground/Chassis
2.3.6 ASI I/O Option Card Connectors
The ASI I/O Option Card rear panel provides two ASI inputs and two ASI outputs.
Figure 2.4 ASI I/O Option Card
Table 2.24 ASI I/O Option Card Connectors
Item Specification
Connector types 75 Ω female BNC
Connector designation ASI IN 1
ASI IN 2
ASI OUT 1
ASI OUT 2
Pin-outs Centre
Shield
Input
Ground/Chassis
The input connectors are used for feeding the unit with external Transport Streams
for external data insertion.
The output connectors can be configured as a mirrored output pair (with the same
Transport Stream on both outputs) or two independent outputs (with different
Transport Streams on each output).